Low Price Plastic Raw Material Virgin HDPE Injection Grade Granule Granules HDPE

• Feature: HDPE
• CAS No.: HDPE
• Formula: HDPE
• EINECS: HDPE
• Material: Polyethylene/PE
• Usage: General Plastics, Engineering Plastics, Specialty Plastics, HDPE
• Model NO.: HDPE
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Reaction Injection Plastic
• Color: White
• Name: HDPE
• Output: 50000/Month
• MOQ: 25mt
• Package: 25kg or Ton Bag
• Appearance: White Guanules
• Transport Package: PP Bag
• Specification: 25kg bag, 1000kg bag
• Trademark: Sinowin
• Origin: Henan
• Production Capacity: 50000 Mt/Month

Product Description

Low Price Plastic Raw Material Virgin Hdpe Injection Grade Granule Granules HDPE
Description of Product:
HDPE is a highly crystalline non-polar thermoplastic resin formed by copolymerization of ethylene and a small
amount of A-olefin monomers. High density polyethylene is synthesized at low pressure, so it is also called low
pressure polyethylene. HDPE is mainly linear molecular structure with few branches. High crystallinity and density.
It can withstand high temperature and has good rigidity and mechanical strength and resistance to chemical corrosion.
The full range of HDPE products produced by Sinopec covers all applications of HDPE, including film, blow molding,
extrusion molding, injection molding, piping, wire and cable, and production of chlorinated polyethylene substrates.

Specification of HDPE:

Grades	HDPE 049	HDPE-100	HDPE-80	HDPE-6081H	HDPE-3000JE
(5.0kg,190ºC)Melt mass-flow rate,g/10min	0.26	0.26	0.430	6.22	2.2
Density,g/cm³	0.95	0.95	0.9458	0.9577	0.956
Tensile stress at yield,Mpa	23.3	23.3	21.3	26.1	24.8
Modulus of elasticity in tension,Mpa	882	882	-	-	-
Flexural modulus,Mpa	1047	1047	955	1057	1020
23ºC Charpy impact strength,KJ/m²	37.8	37.8	11.8H	4.2	12
Temperature of deflection under load(Tf0.45),ºC	77	77	-	-	68
Water content,mg/kg	14	14	58	-	-
Volatile content,mg/kg	213	213	112	-	-
0xidation induction time(0IT,210ºC),min	78.3	78.3	28.9	-	-
Nominal tensile strain at break,%	560	560	298	661	9.6
Application	drain pipe	drain pipe	Water pipe	Injection bottle cap	Injection bottle cap

Application:

HDPE is suitable for many plastic molding methods. Blow molding can be used to make various types of bottles,

cans and industrial cans, drums. Injection molding is used to make various containers and daily necessities, such 

as POTS, buckets, baskets, furniture and so on. Extrusion molding is used to manufacture pipe, tape, fiber,

monofilament, also can be used to manufacture wire and cable coating material and synthetic paper. HDPE can

also be used as an alternative to wood and cardboard in calcium-plastic packaging containers, furniture, doors

and Windows with the addition of a large amount of inorganic filler.

Package & Storage of HDPE: 
 Packed in 25kg bag or 1100kg jumbo bag. 
also be packed according to customer's needs. 
Store closed containers in a cool, dry, well-ventilated area. Avoid exposure to direct sunlight.